Glove Back Pads

Glove Back Pads

Designed to be worn over the back of a welding glove to provide extra protection in high heat situations.

Extends the life of gloves while adding protection from radiant heat, sparks, and spatter.

Replaceable Heat Shield snaps onto welding gloves, with aluminized layer that reflects sparks and radiant heat, keeping hands cooler and more comfortable.

Customs materials and size upon request.

Glove Back Pads

ITEM Details
554
Top: Aluminized Carbon Kevlar® ( ACK )
Middle: Layer of 1500°F melt, ceramic wool material
Bottom: Acrylic coated fiberglass
Leather and elastic straps
7.5”H x 5.5”W
556
Reversible, triple layer protection
Aluminized Carbon Kevlar® ( ACK ) top and bottom
Middle layer 1/2” glass mat insulation
Leather and elastic straps Kevlar stitched and stapled for added strength
Straps can be reversed to opposite side
Pad size 7½”H x 5¾”W
552
Standard 3 layer back-hand pad.
Top layer Aluminized Carbon Kevlar® ( ACK ).
Middle/Bottom: Two layers of vermiculite coated fiberglass.
Adjustable heavy duty leather straps wtih hook/loop closure.
Pad measures 7.5” H x 5.5” W.
558
Double layer.
Aluminized Carbon Kevlar® ( ACK ) back.
Vermiculite impregnated fiberglass back.
4 heavy-duty snaps on each side secure pad to glove.
550
Top: Aluminized Carbon Kevlar® ( ACK )
Bottom: Vermiculite coated fiberglass
Leather and elastic straps
7.5”H x 5.50”W
555
Standard single layer back-hand pad
Aluminized Carbon Kevlar® is designed to protect back of hand and fingers.
Single elastic strap
Size 9.5” H x 5.25” W.
551
Double layer
Top layer: aluminized fiberglass
Bottom layer: carbonized fiber
Leather and elastic straps slip over welding glove for snug, universal fit
Size: 13" x 5-1/2"
557
Double layer
Top layer: aluminized carbon Kevlar®
Bottom layer: Nomex®
Size: 9-1/2" x 7"
553
Single layer
Top layer: aluminized fiberglass
Size: 9-1/2" x 7"

 

Glove Back Pads