Adhesive backed fiberglass tape

Adhesive backed fiberglass tape

Adhesive backed fiberglass tape is fabricated from high quality texturized fiberglass yarns that will not burn and will withstand continuous exposure to temperatures of 1000°F / 520°C. it resists most acids and alkalis and is unaffected by most bleaches and solvents. Available as a Plain tape or Drop-Warp tape (center longitudinal yarns missing), often called a Bolt-hole tape or Ladder tape.
 
Specification:
Thickness: 0.8mm up to 5mm
Width: 20mm up to 200mm
Weaving structure: plain for thickness 0.8mm up to 5mm, twill for thickness 1.5mm up to 5mm
Roll length: max 50m
 
We also make below treatments for some special applications:
 
Aluminum foil faced on one side
Vermiculite coated
Heat treated(caramelized)
Graphite coated
Silicone coated
Backed with self-adhesive tape
 
Adhesive backed fiberglass tape Application:
Provide protection of industrial wires, cables, hoses, tube and pipe and also provide thermal insulation and personnel protection. Also used as a gasket or seal.

Adhesive backed fiberglass tape

Adhesive backed fiberglass tape quick faces
thickness 0.8mm-3.0mm
Width 20mm-300mm
Roll length 30-50m
Weight 680G/Sq.m-2000G/Sq.m
Weave Plain
Temperature Resistance 550℃

Adhesive backed fiberglass tape